Landscaping in Santa Cruz:

Slate Entryway Steps

We worked hard this last week to finish a stairway at our clients house in the Santa Cruz Mountains.

The design for this project was to create a pathway from the driveway to the front door. We came up with a modern looking, staggered stairway that is veneered with 16 inch 'Multi Color' natural slate.

After initial grading and excavation, we begin the layout and forming. 

Time is taken at this stage of the project to get the design and layout perfect.

Making sure the forming is right will allow the the next stages of the job to go more smoothly.

After the forms are up and secured, we install a grid of 1/2 inch rebar to give strength to the new concrete. The rebar grid is laid on 12-16 inch centers, leaving 2 inches on any side of the rebar from the ground and forms. 

We then pour and finish the concrete. Since we are going to be veneering the steps with natural stone slate, we only need a rough finish on the concrete.

Although the finish is 'rough', it is still very important that the steps are completely flat.

After the concrete has cured, we begin laying the slate. We start with the risers of the steps so when we lay the flat work, or 'treads', they can be set over the risers.

We use Thinset to glue the slate to the concrete. 

The slate is carefully spaced and cut into place when needed.

The 'Multi-Color' slate is a very common slate, and has some rich colors.

The 'nose' of each step tread is bullnosed, using a special diamond blade on the tile saw, prior to installation.

The steps are then grouted with a colored, sanded grout. 

We will also be coming back next week to seal the slate with a 'low sheen' stone sealant.

Please visit my Facebook page and website for more info and pictures of other stone installation projects in Santa Cruz.

www.livingwaterslandscaping.com

Front Yard Landscaping in Santa Cruz, Ca.

We Just finished this front yard landscaping project in the West Side of Santa Cruz. It is a simple design, but has a beautiful impact on the house and neighborhood in general. It includes some sod, plantings, landscape lighting and a brick entryway staircase.

We used the Amaryllis Path Light by Aurora Lighting to illuminate the entryway stairs. They are an elegant, flower like low voltage light that are very functional and add an artistic statement to the new landscape.

Please visit Living Waters Landscaping.com for more information on our services.